|
View Enquiry Basket
Battery Chargers
| We offer a striking range of battery chargers industrial battery chargers, that are widely used in various areas to charge batteries. Manufactured with latest advanced technology these digital battery chargers provide flawless functionality for a long period. |
 
 |
Linear Type Battery Chargers Our linear type FCBC battery chargers are available in voltage ranges from 12V to 360V DC that are extensively used in charging batteries, telephone exchanges (EPABX), communication equipments, HT panel charging etc. These liner battery chargers are capable to work as DC – UPS this range of battery chargers are available in following technical specifications:
| Linear Based FCBCs Technical Specifications | | Sr No. | Details | Specifications | | 1 | Input Voltage | 230VAC (Nominal) | | 2 | Input Voltage Range | 170VAC to 270VAC | | 3 | Nominal I/p Frequency | 50 Hz | | 4 | I/p Frequency Range | 45 Hz to 55 Hz | | 5 | Output DC Voltage | As per Customer Requirement | | 6 | Output DC Current | As per Customer Requirement | | 7 | Output DC VoltageAdjustment Range | +/- 10% | | 8 | Output Line & Load Regulation | +/- 1% | | 9 | Output Ripple & Noise | +/- 0.1% + | | 10 | Transient response | + /- 2% (Overshoot / Undershoot)200 usec (Recovery Time) | | 11 | Protections | I/p High cut off I/p Low cut offDC Over VoltageDC Under VoltageO/p over loadO/p short circuit | | 12 | Indications | Over TempMains ONDC OKI/p HighI/p LowDC OverDC UnderO/p Over load | | 13 | O/p Turn on Time | As per requirement | | 14 | O/p Hold up Time | As per requirement | | 15 | Insulation Resistance | I/p to O/pI/p to Earth -- > 10mins. at 500VDCO/p to Earth | | 16 | Breakdown Test | I/p to O/p -- For 1 mins at 1200VACI/p to Earth |
|
Add to Enquiry Basket  
SMPS Based Battery Chargers Our SMPS based battery chargers are available in voltage range from 12V to 360V DC that are widely used in various applications such as battery chargings, telephone exchanges (EPABX), communication equipments, HT panel chargings etc. Capable to work as DC – UPS these industrial battery charger are available in following technical specifications:
SMPS BASED BATTERY CHARGER:
- Input Voltage Range : 160VAC to 270 VAC
- Input Frequency Range : 45 Hz to 55 Hz
- Output Voltage : 12 - 110 VDC
- Output Current : 10 - 50 Amps
- Output Ripple & Noise : + / - 1%
- Overall Efficiency : 85 %
- Input Power Factor : > 0.9 ( It is using PFC technology )
- Output Holdup Time : 200 msec
- Output Turn on Time : 200msec
- I / P Inrush Current : > 30Amp
Transient Response
- Overshoot : +2%
- Undershoot : -2%
- Recovery Time : 200msec
Protections
- I/P O/V
- I/P U/V
- O/P O/V
- O/P U/V
- O/T
- O/P O/L
- O/P Short Ckt
Battery Reverse Protection
Battery Low Cut-OFF
- Indication
- Mains On
- DC OK
- I/P O/V
- I/P U/V
- O/P O/V
- O/P U/V
- O/T
Battery Reverse
Insulation Breakdown Test
- Bet'n I/P & O/P at 1200VAC for 1 min
- Bet'n I/P & Earth at 1200VAC for 1 min
Insulation Resistance Test
- Bet'n I/P & O/P at 500VDC it should be >100MW
|
|
Add to Enquiry Basket
|
Showcase
View all our products / services as a slide show.
Play Now
 
|
© Technovision Energy Private Limited, All Rights Reserved. (Terms of Use)
